• Home
  • News
  • Maintenance and Maintenance of High Speed Mixer

Maintenance and Maintenance of High Speed Mixer

1. Pay attention to the feeding and mixing of the high speed mixer after normal startup. You need to slowly add supplies in the required order.

2. Prepare sealing rings, coupling rubber rings, V-belts, and rolling bearings. The working parts of these components are prone to failure and need to be replaced when necessary.

High Speed Mixer

3. Regularly check whether the fasteners are loose, check the tightness of the V-belt attachment, and remove dirt and dust from all parts of the high speed mixing equipment.

4. Check and trim the gaps between the mixing blades, scrapers and mixing chamber walls to meet the requirements in the table below.

5. Disassemble, clean and inspect each rolling bearing. Replace severely worn parts. Replace grease and sealing rings.

6. Check whether the main drive shaft is bent or worn.

High Speed Mixer

7. Check and clean the cylinder, replace the worn parts of the sealing ring and guide sleeve, and check whether the piston rod is bent, deformed or worn.

8. After the inspection of the main parts is completed, record them, conduct tests if necessary, prepare the parts, and make suggestions for next repair and replacement.

If a high speed mixing machine is used, maintenance can usually be performed once a year.

More recommended Articles

05-14 2024

PVC Blender Machine

PVC blender machine is specially used to mix plastic raw materials to facilitate subsequent process…

Read More
05-11 2024

Industrial Powder Mixing Machine

Industrial powder mixing machine is essential equipment in various industries, including plastics, …

Read More
04-29 2024

Maintenance and Maintenance of High Spe…

1. Pay attention to the feeding and mixing of the high speed mixer after normal startup. You need t…

Read More
04-25 2024

PVC Hot and Cooling Mixing Machine

PVC hot and cooling mixing machine is an industrial equipment specially used to efficiently mix PVC…

Read More

Please Enter Your Message